PCA Reference Data and Services
Toggle Dark/Light/Auto modeToggle Dark/Light/Auto modeToggle Dark/Light/Auto modeBack to homepage
  2. /
  3. Reference Data Library
  4. /
  5. ISO 15926-4 Edition 3
  6. /
  7. LUBRICATE AND BLEED WELL KILLING PROCEDURE

LUBRICATE AND BLEED WELL KILLING PROCEDURE

A class with identifier http://staging4.data.posccaesar.org/iso/15926-4/rdl/RDS17788692

MetadataThis section provides information about 'RDS17788692'.

DefinitionA <LUBRICATE AND BLEED WELL KILLING PROCEDURE> is a <WELL KILLING PROCEDURE> that defines how a prescription shall be formulated for pumping a volume of killing fluid corresponding to half the volume of the well tubing into the well, observing the well for 30 - 60 minutes and wait for the tubing head pressure to drop, then pump additional killing fluid into the well and when the wellhead pressure does not exceed 200 psi above observed tubing head pressure bleed off gas from the tubing at high rate
ISO number16598
RDS numberRDS17788692
SourceInformation and Information Carrier

AlignmentThis section lists the most specific P2-superclasses of 'RDS17788692' together with an alignment with corresponding classes in P14, if available.

FunctionalObjectlis14:FunctionalObject
InformationObjectlis14:InformationObject

ContextThis section provides super- and subclasses of 'RDS17788692'.