SPECIFICATION
A class with identifier
http://staging4.data.posccaesar.org/iso/15926-4/rdl/RDS222262
Definition | A <SPECIFICATION> is an <InformationObject> and a <DOCUMENT> with the purpose of <DEFINING> one or more aspects of one or more physical objects or activities |
ISO number | 4163 |
Note | Typically goods and services |
RDS number | RDS222262 |
Source | Information and Information Carrier |
AlignmentThis section lists the most specific P2-superclasses of 'RDS222262' together with an alignment with corresponding classes in P14, if available.
- STANDARD SPECIFICATION
- INSULATION REQUIREMENT
- VALVE TRIM SPECIFICATION
- ANODE SPECIFICATION
- APPLICABLE SPECIFICATION FOR CENTRIFUGAL COMPRESSOR SERVICE
- CATHODIC PROTECTION SYSTEM SPECIFICATION
- CERTIFICATION SPECIFICATION
- CONSTRUCTION DESIGN SPECIFICATION
- CORROSION INSPECTION SPECIFICATION
- DESIGN SPECIFICATION
- EQUIPMENT SPECIFICATION
- FABRICATION SPECIFICATION
- FIELD BEND SPECIFICATION
- GENERAL SPECIFICATION
- HYDROSTATIC TEST SPECIFICATION
- INSPECTION AND TESTING REQUIREMENTS SPECIFICATION
- HOT TENSILE TEST REQUIREMENTS SPECIFICATION
- HYDROTEST REQUIREMENTS SPECIFICATION
- LEAK TEST REQUIREMENTS SPECIFICATION
- LIGHT BOX INSPECTION REQUIREMENTS SPECIFICATION
- MAGNETIC PARTICLE INSPECTION REQUIREMENTS SPECIFICATION
- ...
- NDT EXAMINATION REQUIREMENTS SPECIFICATION
- QUALITY CONTROL PROCEDURE REQUIREMENTS SPECIFICATION
- RADIOGRAPHIC INSPECTION REQUIREMENTS SPECIFICATION
- ...
- ULTRASONIC INSPECTION REQUIREMENTS SPECIFICATION
- ...
- MATERIAL SPECIFICATION
- METAL LOSS CLUSTER SPECIFICATION
- METAL LOSS GEOMETRIC SPECIFICATION
- NOISE SPECIFICATION APPLICABLE TO ENVIRONMENT
- NOISE SPECIFICATION APPLICABLE TO MACHINE
- PACKAGE SPECIFICATION
- PAINTING SYSTEM SPECIFICATION
- PIPE BEND SPECIFICATION
- PIPE SPECIFICATION
- PIPELINE END SEAL SPECIFICATION
- PIPELINE SEVERITY CODE SPECIFICATION
- PROCEDURAL SPECIFICATION
- REQUIREMENT SPECIFICATION
- TECHNICAL SPECIFICATION
- TOLERANCE SIZING METHOD
- TREATMENT REQUIREMENT SPECIFICATION
- YIELD STRESS SPECIFICATION
- CONTROL SYSTEM FUNCTIONAL SPECIFICATION
- DOCUMENT TYPE REQUIREMENT SPECIFICATION
- DRAFTING SPECIFICATION
- EQUIPMENT INSPECTION SPECIFICATION
- INSULATION AND HEAT TRACING SPECIFICATION
- PERFORMANCE STANDARD FOR SAFETY CRITICAL ELEMENT
- PROJECT SPECIFICATION
- RELIEF AND BLOWDOWN SPECIFICATION
- WELDING AND WELD INSPECTION SPECIFICATION
- WELDING PROCEDURE SPECIFICATION
- COATING SPECIFICATION
- DEXPI SPECIFICATION
- DEXPI SPECIFICATION V1.2
- HEAT AND MATERIAL BALANCE
- SYSTEM SPECIFICATION
- INTERFACE SPECIFICATION