CONTROLLER INPUT PORT
A class with identifier http://staging4.data.posccaesar.org/iso/15926-4/rdl/RDS8928202023
| Definition | A <CONTROLLER INPUT PORT> is a <CONTROLLER PORT> used for inputs |
| ISO number | 11634 |
| RDS number | RDS8928202023 |
| Source | Multi-subject Area |
AlignmentThis section lists the most specific P2-superclasses of 'RDS8928202023' together with an alignment with corresponding classes in P14, if available.
- PROCESS CONTROL INPUT PORT
- EXTERNAL ENABLE TOTALIZING PORT
- EXTERNAL FAULT PORT
- EXTERNAL SET HIGH PORT
- EXTERNAL SET LOW PORT
- EXTERNAL SETPOINT PORT
- EXTERNAL TRACK VALUE PORT
- NORMAL FUNCTION INPUT 1 PORT
- NORMAL FUNCTION INPUT 2 PORT
- NORMAL FUNCTION INPUT 3 PORT
- NORMAL FUNCTION INPUT 4 PORT
- NORMAL FUNCTION INPUT PORT
- POSITION HIGH FEEDBACK PORT
- POSITION LOW FEEDBACK PORT
- POSITION READ PORT
- PRIORITY LEVEL SET HIGH PORT
- PRIORITY LEVEL SET LOW PORT
- RESET PORT
- RESET TOTALIZING EXTERNAL PORT
- ENABLE Motor Control Centre PORT
- CONTROLLER CONTROL INPUT PORT
- FORCE BLOCK HIGH HIGH PORT
- FORCE BLOCK LOW LOW PORT
- FORCE BLOCK PORT
- FORCE DISABLE HIGH PORT
- FORCE DISABLE LOW PORT
- FORCE SAFEGUARD HIGH PORT
- FORCE SAFEGUARD LOW PORT
- FORCE SUPPRESS HIGH HIGH PORT
- FORCE SUPPRESS LOW LOW PORT
- FORCE SUPPRESS PORT
- FORCE SUPPRESS WARNING HIGH PORT
- FORCE SUPPRESS WARNING LOW PORT
- FORCE TOTALIZING PORT
- FORCE TRACKING PORT
- LOCK AUTO PORT
- LOCK EXTERNAL PORT
- LOCK INTERNAL PORT
- LOCK MANUAL PORT
- LOCK OUTSIDE OPERATION PORT
- LOCK SAFEGUARD HIGH PORT
- LOCK SAFEGUARD LOW PORT
- OS BLOCK H/HH OFF PORT
- OS BLOCK H/HH ON PORT
- OS BLOCK HH OFF PORT
- OS BLOCK HH ON PORT
- OS BLOCK L/LL OFF PORT
- OS BLOCK L/LL ON PORT
- OS BLOCKING OFF PORT
- OS BLOCKING ON PORT
- OS MOLECULAR WEIGHT PORT
- OS RESET TOTALIZER PORT
- OS SELECT AUTO MODE PORT
- OS SELECT EXTERNAL PORT
- OS SELECT INTERNAL PORT
- OS SELECT MANUAL MODE PORT
- OS SELECT OFF (LOW) PORT
- OS SELECT ON (HIGH) PORT
- OS SELECT OUTSIDE PORT
- OS SET OUTPUT PORT
- OS SET SETPOINT PORT
- OS SET STEP CLOSED PORT
- OS SET STEP OPEN PORT
- OS SET TOTALIZER OFF PORT
- OS SET TOTALIZER ON PORT
- OS SUPPRESSION OFF PORT
- OS SUPPRESSION ON PORT
- PARAMETER CONTROL INPUT PORT
- ...